Multipurpose Armature machine
YMM – 04
Technical Data of Machine
| Main Drive Motor Capacity | 15 KW |
| Carriage Rapid Traverse in Longitudinal Direction | 600 mm/min |
| Head Stock Spindle Speed – Infinitely Variable | 1.5 to 300 rpm |
| Carriage Feed in Longitudinal Direction | 0 to 100 mm/min |
| Maximum Depth of Cut while Commutator Turning | 2.5 mm |
| Maximum Banding Tension during Wire/Tape Banding | 300 Kg |
Other Details
| Armature | |
| Maximum Armature Weight | 30 KN |
| Minimum Length Of Armature | 500 mm |
| Maximum Length of Armature | 1600 mm |
| Minimum Diameter of Armature | 500 mm |
| Maximum Diameter of Armature | 1400 mm |
| Commutator | |
| Minimum Diameter of Commutator to be Machined | 200 mm |
| Maximum Diameter of Commutator to be Machined | 900 mm |
| Minimum Length of Commutator to be Machined | 75 mm |
| Maximum Length of Commutator to be Machined | 450 mm |
| Accuracies | |
| Ovality of Commutator Turning | <0.015 mm* |
| Taper of Commutator Turning | <0.015 mm* |
| Uniformity of Banding Tension | <±10 Kg |
Pl. note that improvements is a continuous process. Hence, details explained above may undergo some changes meeting functional, quality and productivity requirements of the required technical specification.
Why you choose us for your next project!
- Fully automatic mica under cutting attachment
- Deburring and polishing of commutator
- Commutator and bearing journal turning
- Commutator and bearing journal grinding
- Armature banding and re-rolling
- Coil cut off
- Rigid headstock of closed grained cast iron construction is firmly dowelled and bolted to bed.
- Remote Diagnostic software for faster maintenance support from HYT headquarter.
